Leave Your Message

⚙️ Titanium Rearset Bolts for Motorcycle Applications

Grade 5 titanium fasteners engineered for rearset bracket mounting, footpeg assemblies, and shift & brake control components — precision supply for performance workshops and B2B partners worldwide.

🏭 V Star Titanium · Grade 5 Ti-6Al-4V · B2B Supply

⚙️ What Are Titanium Rearset Bolts?

Titanium rearset bolts are specialised fasteners used throughout motorcycle foot control assemblies. They secure rearset brackets to frame mounting points, attach footpeg carriers and hangers, and fasten the mechanical linkages associated with shift and rear brake control systems.

In performance and custom motorcycle builds, the rearset assembly is subject to continuous dynamic loading, vibration, and environmental exposure. Selecting appropriate fasteners for these positions is a practical engineering decision that affects the long-term reliability of the foot control system.

Grade 5 titanium — commercially designated Ti-6Al-4V — is widely used in this application due to its combination of strength, low density, and corrosion resistance. V Star Titanium supplies Grade 5 titanium rearset bolts in standard specifications and custom configurations for B2B customers across performance workshops, rearset manufacturers, and parts distributors.

🔬 Ti-6Al-4V (Grade 5) is the most widely used titanium alloy in structural fastener applications — offering an exceptional balance of tensile strength, fatigue resistance, and corrosion performance.
⚖️
~40%
Weight Reduction vs Steel
💪
Grade 5
Ti-6Al-4V Alloy Standard
🌍
B2B
Global Supply Network

🔩 Common Applications of Titanium Rearset Bolts

Grade 5 titanium bolts serve multiple fastening positions within motorcycle rearset and foot control assemblies. The following sections describe the primary application areas where titanium fasteners are commonly specified.

🔧

🏗️ Rearset Bracket Mounting

The rearset bracket is the primary structural component of the foot control assembly, typically bolted directly to the motorcycle frame or swingarm pivot area. Fasteners in this position carry the combined load of the rider's foot pressure, braking input, and gear shift force.

  • Socket head cap screws (SHCS) in M6 to M10 diameters
  • Button head cap screws for low-profile fitment
  • Flanged variants where bearing surface area is a consideration
  • Matching titanium washers to distribute load appropriately

⚠️ Thread pitch, length, and head style must match the original specification of the rearset bracket and frame mounting point.

👟

🦶 Footpeg Mounting

Footpeg mounting fasteners attach the footpeg body or carrier to the rearset bracket. These positions typically use smaller diameter bolts and are subject to repeated loading from rider weight and vibration transmitted through the peg.

  • M5 to M8 socket head cap screws in common use
  • Titanium hex bolts where tool access permits
  • Thread-locking compounds or titanium lock nuts as appropriate
  • Correct thread engagement depth per bracket specification

⚠️ Footpeg mounting positions vary significantly between rearset manufacturers. Always verify dimensions against the specific assembly.

🎛️

⚙️ Shift & Rear Brake Control Components

Shift lever pivot bolts, brake lever mounting fasteners, and linkage rod end attachment points are additional positions within the foot control assembly where titanium bolts may be specified. These fasteners are typically smaller in diameter and require precise thread engagement.

  • M5 to M8 pivot bolts with appropriate shank length
  • Shoulder bolts where pivot function is required
  • Hex flange bolts for shift rod clevis attachment
  • Titanium nyloc or all-metal lock nuts for pivot retention

⚠️ Pivot bolt dimensions must be matched precisely to the lever bore and bracket specification to maintain correct function.

✨ Why Use Grade 5 Titanium Rearset Bolts?

Grade 5 titanium offers a combination of material properties that make it a practical choice for rearset fastener applications in performance and custom motorcycle builds.

⚖️

Weight Reduction

Titanium has a density of approximately 4.5 g/cm³, compared to around 7.8 g/cm³ for steel. When replacing a full set of rearset fasteners, the cumulative weight saving is measurable and contributes to overall unsprung and rotating mass reduction in performance applications. The actual saving depends on bolt count, size, and the specific steel grade being replaced.

💪

Strength-to-Weight Ratio

Grade 5 titanium (Ti-6Al-4V) has a tensile strength comparable to many medium and high-strength steel alloys, while being significantly lighter. This means that in applications where the original bolt specification is based on a standard steel fastener, a correctly specified Grade 5 titanium bolt of the same dimensions can provide adequate structural performance at reduced weight.

🛡️

Corrosion Resistance

Titanium forms a stable, self-repairing oxide layer that provides excellent resistance to atmospheric corrosion, moisture, and many common chemical environments. In motorcycle applications, rearset fasteners are exposed to road spray, cleaning agents, and varying weather conditions. Titanium fasteners do not rust and maintain their appearance over extended service periods without surface treatment.

🔄

Fatigue Resistance & Vibration Damping

Titanium exhibits good fatigue resistance under cyclic loading conditions, which is relevant in rearset applications where fasteners are subject to repeated dynamic inputs. Additionally, titanium has a lower modulus of elasticity than steel, which contributes to some degree of vibration absorption in the assembly — a secondary benefit noted in performance applications.

🎨

Aesthetic Appeal

Titanium fasteners have a distinctive silver-grey appearance that is valued in visible areas of performance and custom motorcycle builds. Anodised titanium bolts are also available in a range of colours, providing an additional visual customisation option for rearset assemblies where fastener appearance is a consideration.

🔬

Biocompatibility & Non-Magnetic Properties

While less relevant in typical motorcycle applications, titanium's non-magnetic and biocompatible properties make it a preferred material in broader engineering contexts. For specialist builds or applications with specific material requirements, these properties may be relevant selection criteria alongside the primary mechanical and corrosion performance characteristics.

📐 Common Bolt Types and Specifications

Rearset assemblies use a range of bolt head styles and dimensions depending on the specific mounting position, tool access, and load requirements. The following bolt types are commonly used in titanium rearset fastener applications.

🔩

Socket Head Cap Screws (SHCS)

The most widely used bolt type in rearset assemblies. The cylindrical head with internal hex drive provides a compact profile suitable for recessed mounting positions. Available in a wide range of diameters and lengths to suit different bracket configurations.

Common DiametersM5, M6, M8, M10
Thread PitchStandard metric coarse (1.0 / 1.25 / 1.5mm)
Drive TypeInternal hex (Allen)
Head StyleCylindrical, full-height
🔘

Button Head Cap Screws

Button head bolts feature a low-profile domed head that reduces protrusion in areas where clearance is limited or where a flush aesthetic is preferred. Commonly used for footpeg carrier attachment and bracket cover bolts in rearset assemblies.

Common DiametersM4, M5, M6, M8
Head ProfileLow-profile domed
Drive TypeInternal hex (Allen)
ApplicationLow-clearance positions
🔑

Hex Head Bolts & Flange Bolts

Standard hex head bolts and hex flange bolts are used in rearset positions where external wrench access is available and a larger bearing surface is beneficial. Flanged variants integrate a washer face into the bolt head, reducing the need for separate washers in some applications.

Common DiametersM6, M8, M10, M12
Drive TypeExternal hex (spanner/wrench)
Flange VariantsSerrated or plain flange
Typical UseFrame bracket attachment
🎯

Shoulder Bolts (Pivot Bolts)

Shoulder bolts feature a precision-ground unthreaded shank section that acts as a bearing surface for rotating components. In rearset assemblies, they are used as pivot bolts for shift levers, brake levers, and linkage components where smooth rotation and accurate alignment are required.

Shoulder Diameters5mm, 6mm, 8mm, 10mm
Thread SectionReduced diameter threaded end
ToleranceClose tolerance on shoulder OD
ApplicationLever pivots, linkage joints

🎯 Choosing Titanium Bolts for Rearset Assemblies

Selecting titanium bolts for rearset applications requires careful attention to dimensional compatibility, thread specification, and installation requirements. The following factors should be considered when specifying titanium fasteners for this application.

01

📏 Dimensional Compatibility

Titanium rearset bolts must match the original fastener specification in diameter, thread pitch, length, and head style. Substituting a different head style or length without engineering review can affect clamping force, thread engagement, and component function. Always measure or reference the OEM or rearset manufacturer's specification before ordering.

02

🔗 Thread Engagement

Adequate thread engagement is essential for reliable fastener performance. In aluminium rearset brackets, titanium bolts should have sufficient thread engagement depth — typically a minimum of 1.5× the bolt diameter — to distribute load across enough thread material. Insufficient engagement can lead to thread stripping under dynamic loading.

03

🛢️ Anti-Seize & Lubrication

Titanium fasteners can be susceptible to galling when threaded into titanium or aluminium components without appropriate lubrication. Anti-seize compounds or assembly lubricants should be applied to titanium bolt threads before installation. This is particularly important in rearset assemblies where bolts may be installed and removed periodically for maintenance.

04

🔒 Thread Retention

Rearset fasteners are subject to vibration, which can cause bolt loosening over time. Thread-locking compounds, titanium nyloc nuts, or all-metal prevailing torque nuts should be used as appropriate to the specific position. The choice of retention method should be consistent with the rearset manufacturer's recommendation and the maintenance schedule of the assembly.

05

⚗️ Galvanic Compatibility

Titanium is generally compatible with aluminium in most motorcycle environments, but galvanic corrosion considerations should be reviewed when titanium bolts are used in contact with dissimilar metals in wet or chemically active environments. In most standard rearset applications, titanium-to-aluminium contact does not present a significant corrosion risk under normal operating conditions.

06

📋 Specification Verification

Where titanium rearset bolts are being specified for a new rearset design or as a direct replacement for an existing assembly, dimensional and material verification against the original specification is recommended. V Star Titanium can provide material certifications and dimensional inspection reports for B2B orders where traceability documentation is required.

🏭 Titanium Rearset Bolts for B2B Supply

V Star Titanium supplies Grade 5 titanium rearset bolts to performance workshops, rearset manufacturers, motorcycle parts distributors, and specialist fastener suppliers. Both standard catalogue specifications and custom manufacturing solutions are available to meet the specific requirements of B2B projects.

Standard supply includes common socket head cap screws, button head bolts, hex bolts, and shoulder bolts in metric thread specifications from M4 to M12, with lengths and thread pitches to suit typical rearset assembly requirements. Custom manufacturing is available for non-standard dimensions, head styles, or surface finishes where project requirements fall outside standard catalogue ranges.

  • Performance workshops requiring titanium fastener kits for rearset installation
  • Rearset manufacturers integrating titanium bolts into product assemblies or kit offerings
  • Motorcycle parts distributors supplying titanium fastener ranges to retail and trade customers
  • Custom motorcycle builders specifying titanium throughout visible and structural fastener positions
  • Engineering companies developing new rearset products requiring prototype and production fastener supply

Material certifications, dimensional inspection reports, and long-term supply agreements are available for qualifying B2B customers. Contact V Star Titanium to discuss project-specific requirements.

🔧

Performance Workshops

🏗️

Rearset Manufacturers

📦

Parts Distributors

🔬

Custom Engineering

📜

Material Certifications

🌍

Global Supply Chain

🏢 About V Star Titanium

V Star Titanium is a specialist supplier of titanium fasteners and titanium materials serving the performance, engineering, and industrial sectors. The product range includes titanium fasteners, titanium bars, titanium tubes, titanium plates, and related titanium products.

Both standard specifications and custom manufacturing solutions are available for B2B projects. The company serves performance workshops, engineering companies, and industrial manufacturers worldwide. Its titanium products are used in lightweight structures, performance systems, custom components, and corrosion-resistant environments.

V Star Titanium focuses on practical product knowledge, application-based solutions, and reliable long-term supply support for B2B customers. For rearset fastener enquiries, the team can advise on standard specifications, custom requirements, and appropriate material grades for specific application needs.

⚙️ Titanium Fasteners 📊 Grade 5 Ti-6Al-4V 🔧 Custom Manufacturing 🌍 Global B2B Supply 📜 Material Certifications 🏍️ Motorcycle Applications

📩 Request a B2B Quote

V Star Titanium supplies Grade 5 titanium rearset bolts in standard specifications and custom configurations for performance workshops, rearset manufacturers, and parts distributors worldwide. Contact our team to discuss your project requirements, request a quotation, or enquire about material certifications and supply agreements.

🚀 Contact V Star Titanium